北京豪沃尔互联光纤消防电话系统,还可根据实际工程需要在系统
内任意通讯总线位置增设电话光端机及光纤以替代原有金属电缆( 上图中光纤以绿色线代表), 从而进一步延长
20KM(如工程要求可实现≥ 50KM)的通讯与通话距离。当实际消防工程需要超远距离通讯总线通信并使用光纤
进行通信时, 系统需要在近端和远端分别设置HDM3280 电话光端机分别进行光电及电光转换。 由于光纤传输具
有廉价、使用广泛、数字传输、无干扰、距离远等优点,故北京豪沃尔互联光纤消防电话系统除上文提及的多机、
多电话分区组网互联等功能外还可使用光纤通信使该系统功能更为强大。
在实际工程的系统配置中,系统互联与光电转换可以灵活的组合,通讯总线光纤既可以设置在各电话分区总机的
通讯总线上,也可以设置在各总机间联网通讯总线上,这样使系统可以满足不同类型的工程诉求。由于系统互联
可以自由实现所有通话设备的跨区呼叫及转移,但用户需要注意的是,该系统在互联光纤模式下,任何通话所经
过的电光及光电转换不应超过4 次;任何HDM3310 电话总机所并接的近端HDM3280 光端机不应超过8 个。
与HDM3310 总线消防电话总机配合使用的专用光纤传输设备,可将系统通讯总线上的数字信号及语音信号进行光电转换,
以便利用光纤传输。
通过HDM3280 总线电话光端机进行光电转换后,总线通信距离可延长 20 公里( 可选配 100 公里光接口) 且不影响消防
电话的任何功能。
可在互联系统中任意通讯总线位置进行光电转换,转换过程由近端光端机将通讯总线电信号转为光信号,通过光纤传输后,
再经过远端光端机将光信号还原为电信号。系统支持通讯总线上串接光纤最多4 段;由消防电话总机所并接的近端光端机
最多为8 个。
具有光纤故障巡检功能,并可声光报警通信故障、电源故障。
具有可调通讯信号增益功能,并预留以太网接口。
1U 面板上柜式安装结构,分为M01 单端和M02 双端两种分型。HDM3280M01 内置一组光端模块,HMD3280M02 由两
组独立的光端模块集成在一个机体内,应用时 HDM3280M02 可同时向两个方向输出光信号。
Designed for HWE-BUS optical-fiber transmission, it is dedicated working with HDM3310 bus-line, which is capable
for photoelectric conversion of bus signal and voice.
After the photoelectric conversion from HDM3280, bus-line is able to prolong 20KM by using optical-fiber(40.60.80.100
optical interface optional) instead of metal cable, and not affect any other function of system.
HDM3280 transmitter can be installated at any location of bus-line. When applying photoelectric conversion, busline
signal converted from electric to optical by the proximally transmitter and also, returned beck to electric by distally
transmitter. Users need to be awared of the limitation that system supports bus-line signal passing 4 sections of optical
fiber at maximum; and merge 8 proximally transmitters at maximum.
Real-time monitoring of optical fiber, and sound-light alert for power supply fault and communication failure.
With function of voice gaining adjustment, and reserved ethernet interface.
Compact design with 1U rack room, two optional types with HDM3280-M01 or -M02; HDM3280M01 embeds one
set of optical transmitter module while HDM3280M02 integrates two separate sets of optical transmitter module into
one case. In application, HDM3280M02 can output optical signals in two directions at mean time. Users can choose
different type according to the demand.
指标Parameter
项目名称Project Name 技术参数Technical Parameters
供电电压Power Requirement DC24V±4V ≥ 1A
额定耗电 Rated Energy Consumption ≤ 20W
电缆接口 Cable Interface
HDM3310 电话通讯总线
HDM3310 telephone bus-line
总线信号Bus Signal HWE-BUS, 300-3400Hz/-10dBm
语音增益调节 Voice Gain Adjusting 0dB, 1dB, 2dB, 2.5dB
总线输出电压( 远端)
Bus-line Output Voltage(Remote Terminal) Range
DC20V-DC28V
总线输出电流( 远端)
Bus-line Output Current(Remote Terminal)
>0.25A
速率 Rate 155.520Mbps±4.6ppm
光纤标准 Optical Standard ITU-T G.957/G.958
介质类型 Medium 单模single mode ITU-T G.652/G.653
工作波长Wave Length 1310nm
发光功率 Irradiating Power -2-11dBm
无中继传输距离 No Repeater Transmission Distance 20km(100km 可选optional)
灵 敏 度 Sensitivity 优于-36dBm/above -36dBm
接口形式Interface Model SC
接口速率Interface Rate 10/100M 半、全双工 10/100M half/full duplex
接口兼容协议Interface Compatible Protocol IEEE 802.3
广域网传输速率WAN Transmission Rate
N×64Kbps (n ≤ 30) 即64Kbps 到1.92MKbps 可调
N×64Kbps(n ≤ 30)or adjusting range: 64Kbps ~ 1.92MKbps
使用环境温度Working Temperature Range 0℃ -40℃
使用环境相对湿度 Working Relative Humidity ≤ 90% RH
储存温度Storage Temperature -25℃ -55℃
安装形式Installation Mode 面板上柜安装方式panel installation
安装尺寸 Dimension: 482.6mm×44.6mm (1U)×150mm